HVL steel sheet
After degreasing, a layer of basic water-based paint is applied which is baked at 160 ° C, followed by the final powder coating RAL 9003 which is baked at 200 ° C.
Testing and quality control:
Each radiator was tested at a minimum pritsak of 8.0bar
The maximum working pressure is 6.0bar
Quality control is performed by the Laboratory of the Faculty of Mechanical Engineering in Nis.
connectors screw-in, 4pcs, R1 / 2 “
set for wall mounting,
plug and air tap R1 / 2 “
Guarantee: 10 years